Do you need washers for your craft projects?

Washers for whirligigs

FOR SAFETY REASONS NEVER USE THESE WASHERS TO REPLACE PARTS ON COMMERCIAL PRODUCTS. 

Always use the manufacturer's recommended replacement parts.

    Nylon washers are not very cheap, but I have found an alternative that cost next to nothing, helps the environment and works almost as well. 

    One of the things that I do on a yearly basis is to do preventative maintenance on my whirligigs and weathervane's. With all the moving parts and high winds, there is a lot of wear and tear on these mechanical wonders. What I found out is metal on wood wears out the most, so I use a lot of plastic or nylon washers. Although washers are not the most expensive part to a whirligig, they can cut into your profits.

  I couldn't help, but share this money-saving and environmentally friendly up_cycling of plastic jugs. As for the patterns, I simply invested in an assortment of metal washers to use as a template for the various size washers that I use in my whirligigs. After all for a couple of bucks worth of cheap metal washers, I now have a set of templates that are worth the investment and will never wear out. I could've very easily used a compass to draw the circles, but I wanted something that was more consistent with actual washers.

    
(Be sure to use the appropriate safety goggles and other safety equipment when using rotary tools)

    I have found almond milk jugs and other opaque or heavier jugs seem to make the better washers. Anyhow, using a metal washer as my template and a black marker to trace around the metal washer, I create my patterns. Usually, I take the time to make several hundred at a time, so I have washers on hand for later. Then I simply rough cut them using heavy-duty utility scissors, dollar store kitchen scissors or a Dremel with a fine tip rotary cutting blade. (An X-Acto knife on a cutting board will also work as well.) I then finish the washer by sanding the edges or dragging a knife blade crossways against the grain to remove any ragged edges. A Dremel with an abrasive bit also works very well.

For those of you who like to do things the hard way I have included the following photo as a pattern.

Now keep in mind these washers will not necessarily take the place of a heavy-duty nylon washer and will most likely biodegrade over time if exposed to sunlight.

 For other craft projects and ideas be sure and check out our other blogs and our website at www.nevadacrafter.com

Suitcase into storage craft box

  Setting up at a craft show can be a pain, carrying boxes and totes can be cumbersome and sometimes hard to manage. And then there are times we just simply want a convenient place to carry our crafts when we are on the go. Or maybe we want a special place to put children's activities when they come to visit.
    One of my favorite haunts are yard sales and flea markets. I am constantly finding items to be upcycled, or restored into something new and wondrous. On one such trip I came across a couple of vintage suitcases that were in very poor condition. Although I may have restored them to their original condition I had something less expensive and much better in mind. Going to a craft show with a couple of suitcases seemed much easier than carrying several totes.

I started by painting the outside of the suitcase with a quality exterior house paint. This would help hide any blemishes and give a good protective coating to the outside of the suitcase. Once I had a good protective coating on the outside, I began decorating. First by using one of my favorite stencils to stencil a favorite slogan on the top of the suitcase. This personalize the suitcase and gave it more character. Later I would paint the brass fittings with a nice nail polish to protect them and to make them stand out.

    The inside of the suitcase was in pretty bad shape, with the original felt extremely well-worn and in some places holes. The only option here was to replace it with new felt, which I got at the local fabric store. Using a spray adhesive I cut and placed new felt over the top of the old felt. Once the new felt was in place I tack down the edges with hot glue. I hid this seems by brushing the edges of the seams with a stiff toothbrush.

     I continue to add embellishments from time to time, such as these butterfly stickers. Decorating the suitcases is a matter of using your imagination. One could use a theme such as Alice in Wonderland or use a vintage theme such as travel stickers or decoupage old newsprint or even sheet music. The uses for these suitcases are many, such as costumes and activities for kids or just plain storage for your arts and crafts projects and tools. The possibilities are limitless and should you ever become bored with what you have created it is simply a matter of putting on a new coat of paint and changing the style.