How do you irritate a bird that wants to roost?

 Creating bird spikes with 3D pen

    In my first attempts at creating bird spikes, I simply used a quarter round or half round piece of old molding. Using a 16th inch drill bit I drilled numerous holes and then used the 3-D pen to partly fill the hole with extrusion from the pen and then moving outward creating spikes. 

     Although the finished product did not give me the rigidity in the spikes that I wanted it still seemed to work. 

In my last attempt I ran a bead of plastic at the bottom. This created better adhesion and stability to the spikes. I also tried creating lattice to give it additional rigidity, although I'm not sure that it was needed.
    The spikes do not harm the bird as they are not sharp enough or stiff enough to do so. They end up being more like the bristles on a soft broom and more of an obstacle that the bird can't quite figure out how to get around.
    A piece of styrofoam could be used in place of the wood, making it light enough to be stuck to a wall with poster putty. This might work great with woodpeckers and flickers that tend to roost on the sidewalls or under eaves .

Note: The Styrofoam will melt some with the 3D pen, so use gloves and some caution when working with it. 





     I look forword to hearing any constructive ideas or suggestions. Be sure and check out our other posts, blogs and our website www.nevadacrafter.com

Homemade aluminum plant tags

Homemade aluminum plant tags

 

So you may have wondered why I didn't use aluminum cans?

Aluminum cans are hard to work with and leave sharp edges. That's not to say you can't use them, just be more careful. If you use an aluminum can be sure to bend the edges over to eliminate sharp edges. (note: If you can get cut on a piece of paper, you can get cut on one of these tags.) Sorry in this day and age with all the idiots out there, I have to put disclaimers on everything.

The aluminum I use is easy to work with and it's an aluminum that doesn't normally get recycled. It is not as rigid as aluminum cans, but still holds it's shape.
The plant tags will last for a long time. I have some tags that are over 10 years old. The following is an example of what I put on my tags.

• Name of plant
• date planted (moon phases and or planetary alignment )
• where purchased (note many stores guarantee plants)
• original location (if moved or propagated)
• herb, fruit,vegetable

Or

• Name of plant
• Ref number

Then have a catalog with the reference number and all the details about the plant that you could not include on the tag.

Other ideas are to use the tags on gifts, as Christmas ornaments, luggage tags, or anywhere you need a nice tag.

DIY floating solar lights and battery yard lights ideas

Floating solar lights and yard accent lights

These are inexpensive ways to light up your yard.

Note: glass, plastic, or even metal coffee cans with holes can be used to make yard accent lights.

Make your own stepping stone mold

Stepping stones

Make your own stepping stone mold.
Note: things not mention in video.

1. 1.Stones take up to 5 or 6 days to fully cure and be strong enough to walk on.
2. 2. When setting stones in place it is very important to set them on smooth level ground. any uneven points or rocks under the stone could break or crack the stone.